 | Homewerks 240-4-34-34 No-Lead Swing Check Valve, Solder x Solder, Brass, 3/4-Inch
Brand: Homewerks Model: 240-4-34-34 | *$10.47 |
 | Homewerks 111-1-12-12 No-Lead Standard Port Ball Valve with 1/4-Turn, Compression x Compression, Brass, 1/2-Inch
Brand: Homewerks Model: 111-1-12-12 | *$9.33 |
 | 10 Ton Hydraulic Porta Power Kit
Brand: RAM
Complete kit contains the heavy duty hydraulic equipment you need for lifting, pushing, pulling, bending, straightening and spreading. Includes: Hydraulic pump, ram and spreader, 6' high pressure hose, 2 3/4" flex head, Ram and plunger toe, Serrated saddle, Wedge head, Female to Female connector, 4 male to female extensions: 6 1/2", 12 1/4", 16 1/4", 22 3/8", V-base, Flat base, Storage case | *$119.99 |
 | Homewerks VCK-P40-B5B In-Line Check Valve, Female Thread x Female Thread, PVC Schedule 40, 1-Inch
Brand: Homewerks Model: VCK-P40-B5B Part Number: VCK-P40-B5B
Homewerks VCK-P40-B5B In-Line Check Valve, Female Thread x Female Thread, PVC Schedule 40, 1-Inch.Schedule 40 constructionFits both Schedule 40 and Schedule 80 pipeO-ring seal, spring loaded poppet, and stainless steel springThreaded end complies with ANSI B1.20.1Not for use with compressed air | *$8.62 |
 | Prince PMC-42512 Sword Hydraulic Cylinder, Welded, 2-1/2" Bore, 12" Stroke, 3000 psi Maximum Pressure, 22-1/4" Retract, 1-1/4" Rod Diameter, Clevis Mounting, White, 1/2" NPTF
Brand: Prince Part Number: PMC-42512
Prince Welded Sword Hydraulic Cylinder; Bore: 2-1/2", Stroke: 12", Maximum pressure: 3000 psi, Column load: 14723 lbs, Retract: 22-1/4", Rod diameter: 1-1/4", Mounting type: Clevis, Color: White, Port size: 1/2" NPTF | *$209.96 |
 | Cash Acme Div. Of Reliance Ww 18138-0000 Vacuum Relief Valve 1/2 " MPT
Brand: CASH ACME Model: 18138-0000 Part Number: 18138-0000
"CASH ACME" VACUUM RELIEF VALVE
1/2"MPT
Prevents internal vacuum conditions
Guards against siphonage, burnt out heaters collapsing of storage tanks and negative pressure
Opens quickly in emergency situations: opens on a one inch mercury vacuum
Listed by CSA: inspector friendly peace of mind
Every value is tested for performance prior to shipping | *$9.29 |
 | Prince PMC-8316 Royal Hydraulic Cylinder, Welded, 3" Bore, 16" Stroke, 2500 psi Maximum Pressure, 24" Retract, 1-1/2" Rod Diameter, Crosstube Mounting, Red, 1/2" NPTF
Brand: Prince Part Number: PMC-8316
Prince Welded Royal Hydraulic Cylinder; Bore: 3", Stroke: 16", Maximum pressure: 2500 psi, Column load: 21201 lbs, Retract: 24", Rod diameter: 1-1/2", Mounting type: Crosstube end fittings with grease zerks, Color: Red, Port size: 1/2" NPTF | *$228.10 |
 | Prince B400180ABACA07B Hydraulic Cylinder, Tie-Rod, 4" Bore, 18" Stroke, 3000 psi Maximum Pressure, 28-1/4" Retract, 1-3/4" Rod Diameter, Clevis Mounting, Black, #8 SAE
Brand: Prince Part Number: B400180ABACA07B
Prince Tie-Rod Hydraulic Cylinder; Bore: 4", Stroke: 18", Maximum pressure: 3000 psi, Column load: 37700 lbs, Retract: 28-1/4", Rod diameter: 1-3/4", Mounting type: Clevis, Color: Gloss Black, Port size: #8 SAE | *$326.66 |
| Prince PMC-42008 Sword Hydraulic Cylinder, Welded, 2" Bore, 8" Stroke, 3000 psi Maximum Pressure, 20-1/4" Retract, 1-1/8" Rod Diameter, Clevis Mounting, White, 1/2" NPTF
Brand: Prince Part Number: PMC-42008
Prince Welded Sword Hydraulic Cylinder; Bore: 2", Stroke: 8", Maximum pressure: 3000 psi, Column load: 9423 lbs, Retract: 20-1/4", Rod diameter: 1-1/8", Mounting type: Clevis, Color: White, Port size: 1/2" NPTF | *$203.57 |
 | JET RHP-80 Rotary Hand Pump
Brand: Jet Model: RHP-80 Part Number: 140035
Includes Rotary Hand Pump - 140035 | *$72.98 |
 | Prince PMC-21008 Gladiator Hydraulic Cylinder, Welded, 5" Bore, 8" Stroke, 3000 psi Maximum Pressure, 19" Retract, 2-1/2" Rod Diameter, Crosstube Mounting, Yellow, 3/4" NPTF
Brand: Prince Part Number: PMC-21008
Prince Welded Gladiator Hydraulic Cylinder; Bore: 5", Stroke: 8", Maximum pressure: 3000 psi, Column load: 64000 lbs, Retract: 19", Rod diameter: 2-1/2", Mounting type: Crosstube end fittings with grease zerks, Color: Highway Yellow, Port size: 3/4" NPTF | *$486.40 |
| Prince B400360ABACA07B Hydraulic Cylinder, Tie-Rod, 4" Bore, 36" Stroke, 3000 psi Maximum Pressure, 46-1/4" Retract, 1-3/4" Rod Diameter, Clevis Mounting, Black, #8 SAE
Brand: Prince Part Number: B400360ABACA07B
Prince Tie-Rod Hydraulic Cylinder; Bore: 4", Stroke: 36", Maximum pressure: 3000 psi, Column load: 16680 lbs, Retract: 46-1/4", Rod diameter: 1-3/4", Mounting type: Clevis, Color: Gloss Black, Port size: #8 SAE | *$423.10 |
 | Homewerks 114-4-1-1 No-Lead Full Port Packing Gland Ball Valve with 1/4-Turn, Solder x Solder, Brass, 1-Inch
Brand: Homewerks Model: 114-4-1-1 | *$14.46 |
 | Haldex High Pressure Hydraulic Gear Pump - .258 Cu. In., Model# 1002966
Brand: Haldex
This Haldex high pressure hydraulic gear pump provides superior versatility. Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy duty cast iron pump turns at 4000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient. U.S.A. Max. PSI: 2,300, Shaft Diameter (in.): 1/2 x 1 1/2, GPM: 2, 4, Material: Cast iron, Usage: Fluid pump or fluid motor, Rotations Per Minute: 4,000 | *$129.99 |
 | Homewerks VGV-1LH-T2B Premium Gas Ball Valve, Flare x Flare, Brass, 3/8-Inch
Brand: Homewerks Model: VGV-1LH-T2B Part Number: VGV-1LH-T2B
Homewerks VGV-1LH-T2B Premium Gas Ball Valve, Flare x Flare, Brass, 3/8-Inch.1-Piece forged brass body1/2 PSIG and 5 GCSA CR91-002 Certified for use on piping; ANSI Z21.15 / CSA 9.1 Certified for appliances and appliance connectorsASME B16.44 Certified for use in above ground piping systems up to 5 PSIMade in Italy | *$15.40 |
 | Omega 60253 25 Ton Shop Press
Brand: Omega Model: 60253 Part Number: 60253
Ideal for the removal or installation of gears, universal joints, pulleys, wrist pins, and other various press jobs. Side frames are open for inserting long material. Excellent for bending, bonding, or straightening applications. This makes an excellent addition to any shop! | *$629.25 |
 | Homewerks VAC-VBK-X1B Vacuum Breaker Replacement Kit for Traditional Anti-Siphon, Frost-Free Sillcock Valves
Brand: Homewerks Model: VAC-VBK-X1B | *$4.72 |
 | 1056-66 Fernco 6" x 6" Flexible Coupling
Brand: Fernco
Fernco 6" x 6" 1056-66 Flexible Coupling (CI and Plastic to CI, Plastic)
Part No. 1056-66
Dimensions: 6.60" x 6.60" x 5.74"
Used for all types of in-house and sewer connections: drain, waste, vent piping, house-to-main, repairs, cut- ins, conductor, roof drains and increasers-reducers.
Dimensions:
A - 6.60"/168mm
B - 6.60"/168mm
C - 5.74"/146mm
Made of tough elastomeric polyvinyl chloride (PVC), they are strong, resilient and unaffected by soil conditions. They are also resistant to chemicals, ultraviolet rays, fungus growth, and normal sewer gases due to the inert nature and physical prop- erties of the material. And they're leak-proof, root-proof and seal against infiltration and exfiltration. | *$7.58 |
 | OTC 4022 Air/Hydraulic Pump with 2-Gallon Reservoir
Brand: OTC Model: 4022 Part Number: 4022
OTC Air/Hydraulic Pump with 2-Gallon Reservoir with shop air as the energy source these pumps have the power and oil capacity (80 cu. in. the usable oil) to drive even the large 55-ton rams. They are ideal all-around power sources for dozens of body frame and alignment applications. They can be used with a variety of rams presses and hydraulic pullers operating at up to 10000 PSI. An internal relief valve protects the hydraulic components regardless of hydraulic pressure. In addition a two-stage release mechanism gives fast or metered ram return while reducing hydraulic shock. It develops 10000 PSI at 100 PSI air pressure. 3/8 inch NPTF oil port. 2-gallon (442 cu. in.) capacity plastic reservoir. | *$519.92 |
 | Brass Craft #PSBV503-12 3/4FPT Gas Ball Valve
Brand: BrassCraft Model: PSBV503-12 Part Number: PSBV503-12
SL Series, 3/4" Female Pipe Thread, Brass Gas Ball Valve. | *$9.06 |
 | MM-260 Aluminum Single-Sided Ports Manifold 3/4 NPT Ports, 1. NPT Inlet
Brand: Reid Supply Company Part Number: MM-260
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$62.39 |
 | Hypro D30 Diaphragm Kit 9910-Kit1724
Brand: Hypro-Diaphragm-Pumps Part Number: hdp_hypro_kit1724
The Hypro diaphragm repair kit 9910-Kit1724 is used to replace worn or damaged diaphragms on the Hypro D30 diaphragm pump. When the fluid in the oil sight glass turns a milky gray color it means that one (or more) of the diaphragms has ruptured and the fluid to be pumped is mixing with the oil in the crank case. If this happens to your D30, you will need to purchase a diaphragm repair kit: Kit1724 includes 2 Main Diaphragms (Desmopan), 1 Accumulator Diaphragm (Buna-N), and 4 O-Rings. The O-Rings are used to replace those rings that may have absorbed chemical due to the rupture. | *$62.97 |
 | OTC 4002 Single-Speed Hydraulic Hand Pump
Brand: OTC Model: 4002 Part Number: 4002
This single-speed pump is ideal for single-acting rams. Developing up to 10,000 PSI operating pressure, the pump operates horizontally or vertically in the head down position. Fingertip control provides instant release or pumping action. Has a built-in safety overload valve. Ideal for use with OTC single-acting rams, or similar competitors feet rams. Specifications: maximum. operating pressure 10,000 PSI, volume per stroke 160 cubic inch, reservoir capacity 45 cubic inches and an 3/8 inch NPT oil port. | *$219.23 |
 | 12 Ton Hydraulic Shop Press
Brand: Generic
Remove and install bearings, gears, U-joints, bushings, ball joints, pulleys, etc. Open side heavy duty construction allow work on the longest work pieces. Raise and lower table for the best working distance possible. Spring return ram speed up your work. Get tremendous pressure with very little effort for all your arbor and press out jobs. | *$112.99 |
| MM-10 Aluminum Single-Sided Ports Manifold 1/4 NPT Ports, 3/8 NPT Inlet
Brand: Reid Supply Company Part Number: MM-10
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$13.44 |
 | Prince Hydraulic Control Valve - 8 GPM, 3-Spool, Model# MB31BBB5C1
Brand: Prince
This Prince hydraulic control valve features a compact design that is ideal for small tractors and other low flow operations. SAE #8 ports eliminate leakage, enclosed handles eliminate exposure to elements. 4-way, 3-position spring center; can be converted to closed center or Power Beyond. 3500 max. PSI; 2000-3500 PSI adjustable relief, preset at 2500 PSI. Max. Flow (GPM): 8, Inlet Port (in.): SAE 8, Outlet Port (in.): SAE 8, Working Port (in.): SAE 8, Max. PSI: 3,500, Directional Control: 4-way, 3-position, Spool (qty.): 3, Adjustable Release Pressure PSI: 2,000-3,500, preset 2,500 | *$269.99 |
 | Sioux Chief 672XV0699, 1/2" PEX Manifold w/ valves, 3/4" PEX in
Brand: Sioux Chief Part Number: 672XV0699
3/4" crimp style PEX inlet. 3/4" crimp style PEX outlet. (6) branches with 1/2" PEX crimp style ball valves (1/4 turn), at 2" OC spacing. 1" Copper pipe size manifold trunk. | *$67.95 |
 | 1/2" PEX x 1/2" PEX Coupling
Brand: Everhot Part Number: BPF7003
PEX Coupling is used to connect two ends of PEX tubing together. This crimp style PEX fitting can be installed using the following connection systems Crimp Connection System (Copper Crimp Rings PEX Crimp Tool) Clamp (Cinch) Connection System (Stainless Steel PEX Clamps PEX Clamp Tool) Manufactured to ASTM F1807. For use with 1/2" PEX Tubing. | *$0.54 |
 | H3B , FHK Series Hydraulic, Brass Socket, 3/8 in. Female Pipe
Brand: Foster Manufacturing | *$15.12 |
 | Nortrac Steel Hydraulic Oil Tank - 4.8 gallon
Brand: NorTrac
This Nortrac hydraulic oil tank features sturdy 12-gauge steel welded construction with a black powder-coat finish. Welded-on mounting brackets. Includes clip-on style breather cap. Suction strainer Item# 4011 fits oil tank Item# 405111 (strainer not included). U.S.A. Capacity (gal.): 4.8, Suction Port (in.): 1 1/2, Return Port (in.): 3/4, Mount Type: 4 bolt, Material Type: Powder-coat steel, Dimensions L x W x H (in.): 15 x 9 x 8 | *$89.99 |
| | Greenlee 30242 Seal Repair Kit for 767 Hydraulic Hand Pump
Brand: Greenlee Part Number: 30242
- Repair kit for use with Hydraulic Hand Pump 767 with serial code 66BG to BG33181628 and for Serial Code BG331816 Up | *$30.10 |
 | Apache Hose Belting, Inc. 43082012 T-Bolt Clamp
Brand: Apache Hose Part Number: 43082012
Stainless steel ultra T bolt clamp. Clamps are individually tagged with the UT number and Apache part number/UPC code. Band and saddle: 3/4'' wide 304 stainless steel (saddle provides 360 sealing surface). T Bolt and nut: 304 stainless steelbolt with 7/16'' zinc plated nut to prevent corrosion and seizsing on stainless steel bolt (nut includes nylon longing insert). 4 spot welds on each end of clamp for extra strength (clamps rated 75.0 lb. applied torque). Each clamp is stamped with the minimum/maximum size range. | *$3.19 |
 | SFA Saniflo M200 Turboflush Grinder Upflush Toilet Pump
Brand: SFA Saniflo Model: M200 Part Number: M200
Model | *$476.99 |
 | Mueller/B K 109-503 Anti-Sweat Valve
Brand: Mueller Part Number: 109-503
Eliminates condensation, prevents dripping of toilet tanks, ends moisture on floors. Built in check valves prevent hot and cold water cross connection. Water temperature is adjustable, hot water inlet can be shut off during off season. Superior to tank liners, provides a permanent solution. All connections are 5/8'' O.D. compression. Import. | *$13.83 |
 | SHURflo 2088-474-144 Standard Demand Pump 24VDC
Brand: SHURflo
shurflo 2088 series 3 chamber-demand pumps offer UL Marine listed, rugged pressure pump that can deliver up to 3.6 GPM from a 12 or 24 Vdc battery pack (self-priming to 9 feet vertical). These are ideal pumps for a cabin, watering project, or a small home system. Features adjustable pressure switch, 30-50 psi. | *$99.00 |
 | COUPLER FOR RAM
Brand: BlackHawk Part Number: B69477
pstrongFeatures and Benefits:/strong/p ul li13/16 - 20 UNEF coupler connecting thread/li li1/4 NPT hose/ram thread/li /ul | *$14.69 |
 | Homewerks VGV-1LH-R4B Premium Gas Ball Valve, Female Thread x Flare, Brass, 3/4-Inch FIP x 15/16-Inch FL
Brand: Homewerks Model: VGV-1LH-R4B | *$14.51 |
 | Nortrac Hydraulic Breather Cap - 1in. NPT, Chromed Steel
Brand: NorTrac
This Nortrac hydraulic breather cap includes 40 micron open cell foam to protect hydraulic tank from airborne contamination. Fitting Size (in.): 1 NPT, Filter Rating: 40 micron open cell foam, Material Type: Chromed steel | *$10.99 |
 | Torin Big Red Hydraulic Ram Hose - 10-Ton Capacity, Model# T71102
Brand: Torin
High-pressure hose with 1/4in. connections. For use with 10-ton hydraulic ram system, Item# 144424 (sold separately). Hose Fitting Size (in. NPT): 1/4 | *$20.99 |
 | 5PK 1/2x1/2FPT Adapter
Brand: Watts Part Number: LFWP13B-0808PB
Lead free brass barbed insert x FPT (female pipe thread) nut straight swivel adapter for PEX pipe. Secured to PEX pipe with either stainless steel CinchClamp and Cinch Tool or copper crimp rings and crimp tools (not included). Bagged. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces. | *$10.81 |
 | K1B , FHK Series Hydraulic, Brass Plug, 1/8 in. Female Pipe
Brand: Foster Manufacturing | *$3.84 |
 | Haldex 12 Volt DC Hydraulic Power Unit, Model# 1510027
Brand: Haldex
Use in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank. Check and relief valve. 1/4in.-18 SAE ports. Items 1076 and 1077 are for double acting cylinders; others are for single acting cylinders. U.S.A. Displacement (cc): 2.11, Displacement (cu. in.): .129, Flow (GPM): 1.4 at 1,600 PSI, Reservoir Capacity: 3 qt., Inlet Port (in.): 1/4 18 SAE, Outlet Port (in.): 1/4 18 SAE, HP: 1.7, Max. PSI: 3,000, Volts: 12, Max. RPM: 2,750 | *$499.99 |
 | Blackhawk (BLA69477) Banner Ram Half Coupler
Brand: BlackHawk Model: BHK69477 Part Number: 69477
pulli13/16 - 20 UNEF coupler connecting thread/lili1/4 NPT hose/ram thread/li /ul | *$14.16 |
 | Sunex Tools (SUN5220AH) 20 Ton Capacity Air/Hydraulic Shop Press
Brand: Sunex Part Number: 5220AH
ul liAll welded steel construction /li liHeavy duty return springs for fast ram retraction /li liReinforced head plate /li liAir power for greater speed /li liBed plates, bearing punch and bearing shield included as standard equipment/li/ulpFrame made in USA - Imported bottle jack. Height: 66.5"; base width: 24"; stroke: 4.75"; pin diameter: 1"; shipping weight: 261 lbs./p | *$611.99 |
 | Udor Kappa 43/GR Pump
Brand: justudorpumps.com Model: jup_Kappa-43_GR Part Number: jup_Kappa-43_GR
The Udor Kappa 43/GR pump is a 3-diaphragm pump with control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and pressure gauge. The 43/GR is fitted with a gearbox for 4 HP to 6.5 HP gas engines with 3/4" shafts. Use the Udor Kappa 43/GR pump for agricultural and horticultural spraying applications, along with lawn and turf care spraying applications such as pest control. | *$844.48 |
| H1B , FHK Series Hydraulic, Brass Socket, 1/8 in. Female Pipe
Brand: Foster Manufacturing | *$8.40 |
 | Homewerks 114-2-1-1 No-Lead Full Port Packing Gland Ball Valve with 1/4-Turn, Female Thread x Female Thread, Brass, 1-Inch
Brand: Homewerks Model: 114-2-1-1 | *$13.84 |
 | 220 Hydraulic Grease Fittings Zerk Alemite
Brand: American Tool Model: 41101 Part Number: 41101
New 220 PC HYDRAULIC GREASE FITTING
You will receive double of what is shown above and stated below!!
This huge set includes all of the fittings you will need for all of your applications.
Multiple npt size, and a large variety of angles will make installing or replacing the right fitting fast and easy....not to mention greasing will be a snap having the right angle.
Includes:
30 -- straight 1/4" - 28
15 -- 45 degrees 1/4" - 28
15 -- 90 degrees 1/4" - 28
15 -- 90 degrees 1/8" - NPT
15 -- 45 degrees 1/8" - NPT
20 -- straight 1/8" - NPT
Clear Storage case for organization. | *$20.85 |
| Prince PMC-5420 Royal Hydraulic Cylinder, Welded, 2-1/2" Bore, 20" Stroke, 2500 psi Maximum Pressure, 28" Retract, 1-3/8" Rod Diameter, Crosstube Mounting, Red, 3/8" NPTF
Brand: Prince Part Number: PMC-5420
Prince Welded Royal Hydraulic Cylinder; Bore: 2-1/2", Stroke: 20", Maximum pressure: 2500 psi, Column load: 14723 lbs, Retract: 28", Rod diameter: 1-3/8", Mounting type: Crosstube end fittings with grease zerks, Color: Red, Port size: 3/8" NPTF | *$198.69 |
| Prince PMC-5636 Royal Hydraulic Cylinder, Welded, 4" Bore, 36" Stroke, 2500 psi Maximum Pressure, 45" Retract, 2" Rod Diameter, Crosstube Mounting, Red, 1/2" NPTF
Brand: Prince Part Number: PMC-5636
Prince Welded Royal Hydraulic Cylinder; Bore: 4", Stroke: 36", Maximum pressure: 2500 psi, Column load: 28710 lbs, Retract: 45", Rod diameter: 2", Mounting type: Crosstube end fittings with grease zerks, Color: Red, Port size: 1/2" NPTF | *$421.71 |
|
