 | Prince W400240 Wolverine Hydraulic Cylinder, Tie-Rod, 4" Bore, 24" Stroke, 2500 psi Maximum Pressure, 34.25" Retract, 2" Rod Diameter, Clevis Mounting, Black, 1/2" NPTF
Brand: Prince Part Number: W400240
Prince Tie-Rod Wolverine Hydraulic Cylinder; Bore: 4", Stroke: 24", Maximum pressure: 2500 psi, Column load: 37692 lbs, Retract: 34.25", Rod diameter: 2", Mounting type: Clevis, Color: Black Powder Coat, Port size: 1/2" NPTF | *$241.13 |
 | Cash Acme Div. Of Reliance Ww 20166 Pressure Relief Valve
Brand: Cash Acme Model: 20166 Part Number: 45011
PRESSURE RELIEF VALVE ASME Section IV listed and rated for emergency steam discharge by the National Board of Boiler and Pressure Vessel Inspectors. Bronze body and inside working parts, silicone seat, stainless steel spring. Pop type action provides maximum safety. F-30 set at 30 psi only. Approvals: The F-30 are NB capacity certified to ASME Section IV. * 3/4" MIP inlet x 3/4" FIP outlet * 30 PSI * For hot water space heating boilers,water supply heaters and storage tanks * Not for steam * 510,000 BTU | *$9.97 |
 | 110-Piece Hydraulic Grease Fitting Assortment - Metric
Brand: Neiko Part Number: HGF110M
ATD-357110-Piece SAE Hydraulic Grease Fitting AssortmentContains: (30) Straight 1/4"-28 grease zerk fitting(20) Straight 1/8" pipe grease zerk fitting(15) 45anddeg;1/4"-28 grease zerk fitting(15) 90anddeg;1/4"-28 grease zerk fitting(15) 90anddeg;1/8" grease zerk fitting(15) 45anddeg;; 1/8" grease zerk fittingMolded storage case included | *$7.67 |
| Prince W200120 Wolverine Hydraulic Cylinder, Tie-Rod, 2" Bore, 12" Stroke, 2500 psi Maximum Pressure, 22.25" Retract, 1.125" Rod Diameter, Clevis Mounting, Black, 3/8" NPTF
Brand: Prince Part Number: W200120
Prince Tie-Rod Wolverine Hydraulic Cylinder; Bore: 2", Stroke: 12", Maximum pressure: 2500 psi, Column load: 9423 lbs, Retract: 22.25", Rod diameter: 1.125", Mounting type: Clevis, Color: Black Powder Coat, Port size: 3/8" NPTF | *$99.13 |
 | Kohler Genuine Part 84499 1B1X Conversion Kit, Fill Valve and Flush Valve
Brand: Kohler
Kohler Genuine Part 84499 1B1X Conversion Kit, Fill Valve and Flush Valve Kohler Replacement For Kohler Toilets Replaces 42388 | 42393 | 42471 | 42482 | 42576 | 84447 | 84501 | 84503 | Replaces 30673 | 30730 | 42578 | 54641 | 84453 | 84455 | 84498 | 500249 | *$85.00 |
 | Haldex Hydraulic Pump - 13.6 GPM, 2-Stage, Model# 1001506
Brand: Haldex
The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A. Max. PSI: 3,000, Shaft Diameter (in.): 1/2, Shaft Type: Straight keyed, GPM: 2.9, 13.6, Stage: 2, Material: Cast iron, Usage: Open center hydraulic systems, Rotations Per Minute: 3,600, Weight (lbs.): 10 | *$159.99 |
 | Loc-Line LP-21192 1/4 Loc Line Coolant Hose Male NPT Valve, Qty. (2) Male NPT Valves
Brand: Loc-Line Part Number: LP-21192
Male NPT Valves | *$10.24 |
 | Advanced Tool Design Model ATD-5800 4 Ton Porto-Power® Set
Brand: ATD Model: ATD-5800 Part Number: ATD-5800
Features convenient snap-fit tubing and displacement type pump. Set contains hydraulic pump, ram, 1000 lb. capacity hydraulic spreader, hose, 6 extension tubes, 1-3/4" flex head, ram toe, plunger toe, serrated saddle, wedge head, 90? v-base, flat base, male adapter, female adapter and storage case. Set has large base feet at both ends for extra stability. Tubing is made of special seamless steel with smoother, harder surface. Will hasten common collision repair and also has many other industry, farm and home uses. | *$131.49 |
 | Mastercool 85530 3-IN-1 Side Mount Can Tap Valve
Brand: MasterCool Model: MSC85530 Part Number: 85530
ul liThe new side entry can tap is like having three tools in one/li liUnique design will work on all R134a (2-7/8"), R12 (2-1/2") and oil charge (2") cans/li liThe outlet port offers a 1/2" ACME and 1/2" FL fitting with an internal check valve to prevent system backflow/li liThe "pliers style" grip is easy to use and has a positive locking latch to insure secure engagement/li/ul | *$9.19 |
 | Homewerks VGV-1LH-B3B Premium Gas Ball Valve, Female Thread x Female Thread, Brass, 1/2-Inch
Brand: Homewerks Model: VGV-1LH-B3B | *$9.10 |
 | OTC 4020 Air/Hydraulic Pump
Brand: OTC Model: 4020 Part Number: 4020
The OTC air/hydraulic pump are an ideal all-around power source that develops 10,000 PSI at 100 PSI air. Product features a two-stage release mechanism, internal relief valve as well as a 3/8 inch NPTF oil port and 98 cubic inches of usable oil. | *$352.11 |
 | David's Garden Tool Irrigation EZ Flo Injector Ball Valve Coupling 1 Inch Slip x Slip
Brand: David's Garden Seeds Model: D9486 Part Number: D9486
For permanent inline connection to sprinkler drip emitter systems. Schedule 40 PVC female socket connections for gluing into system, after the discharge of any zone valve. Two 1/4" nylon barbed fittings connect to any EZ-FLO Fertilizer Injector. Ball valve allows precise flow regulation with viscosity variation of different liquid fertilizers. | *$31.95 |
 | Homewerks VWM-DUA-F3B Washing Machine Valve, Male Pipe Thread, Brass, 1/2-Inch
Brand: Homewerks Model: VWM-DUA-F3B Part Number: VWM-DUA-F3B
1/2", Washing Machine Shut Off Valve, Single Lever Shut Off Control, 1/2" Iron Pipe Threaded Connection, Hot Cold, 3/4" Hose Thread Outlets. | *$14.38 |
 | Heavy-Duty 10-Ton Air Hydraulic Pump - Foot Control
Brand: TR
Operates at 70-170 PSI to develop up to 10,000 PSI, maximum output 20,000 lbs. Average air consumption 10 CFM; air inlet 1/4" NPT, includes 6' hydraulic hose with fitting; Stroke length 1", oil flow at 100 PSI 30 cu in/min; usable oil capacity 42 cu in (690cc). | *$104.99 |
 | Chicago Pneumatic 8940168515 Filter-Regulator-Lubricator with Gauge, 1/4-Inch
Brand: CP (Chicago Pneumatic) Model: 8940168515 | *$121.12 |
 | Watts Water Technologies P-10PORT Preassembled PEX Manifold
Brand: Watts Water Technologies Model: P-10PORT Part Number: P-10PORT
Watts manifolds operate much like an electrical breaker box. The main water supply lines bring water into the manifold and individual distribution lines move water out to each fixture. All outlets have a built in valve which allows you the ability to stop the water flow to any single fixture without shutting down the entire water system. The Watts manifold system utilizes an exclusive modular design. manifold sections can be expanded using additional stem bodies. brNo. P 10PORT: 10 port brNo. P 20PORT: 20 port | *$95.97 |
 | 10 Ton Foot Air/ Hydraulic Porta Power Pump
Brand: Unknown Part Number: 50622
10 Ton Foot Air/ Hydraulic Pump. Use this pump with 4 or 10 ton Porta Power Units. This pump works for standard and long ram hydraulics, Rated pressure: 10,000 psi, Air pressure: 70-170 psi, Stroke length: 1", Oil flow at 100 psi air pressure: 30 cu. in/Min. Usable oil capacity: 42 cu. in. (690 c.c), Air consumption: 10 CFM, Air inlet thread NPT: 1/4", Includes 6"-Hydraulic hose with fittings | *$109.99 |
 | Cash Acme 2016-0000 Shark Bite SharkBite Check Valve, 3/4-by-3/4-Inch
Brand: Cash Acme Model: 2016-0000 Part Number: U2016-0000A
Check valve with push fit connections. Brass. UPC, IAPMO, and NSF 61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F., 200 PSI. It is made of 1 piece DZR brass, which is a noncorrosive, low lead material. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. | *$13.49 |
 | Cash Acme 22185 Shark Bite Push-Fittings Ball Valve, 3/4-Inch
Brand: Cash Acme Model: 22185 Part Number: 22185-0000
Brass ball valve with push fitting connections. UPC, IAPMO, and NSF 61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F., 200 PSI. It is made of 1 piece DZR brass, which is a noncorrosive. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. | *$12.00 |
 | Prince PMC-5416 Royal Hydraulic Cylinder, Welded, 2-1/2" Bore, 16" Stroke, 2500 psi Maximum Pressure, 24" Retract, 1-3/8" Rod Diameter, Crosstube Mounting, Red, 3/8" NPTF
Brand: Prince Part Number: PMC-5416
Prince Welded Royal Hydraulic Cylinder; Bore: 2-1/2", Stroke: 16", Maximum pressure: 2500 psi, Column load: 14723 lbs, Retract: 24", Rod diameter: 1-3/8", Mounting type: Crosstube end fittings with grease zerks, Color: Red, Port size: 3/8" NPTF | *$190.88 |
 | 1/4 Turn Ice Maker Ball Valve, 1/2" FIP x 1/4" OD - By Plumb USA
Brand: Plumb Model: 42511 Part Number: 42511
Great for safety-concerned customers. Turn off water supply for ice maker if going out of home for long time. | *$12.00 |
 | 100PK 1/2" BRS Coupling
Brand: Watts Water Technologies Part Number: WP15B-0808
100pk 1/2"cf brs couplng. For polyethylene (PEX) crimp system. For hot or cold water applications. Copper crimp rings not included. Bagged. 100 pack, 1/2" CF | *$30.29 |
 | Leisure Components 199-9 Repair Kit for Hand Pumps
Brand: Leisure Components Model: 199-9 Part Number: 1999
Leisure Components Repair Kit. The Repair Kit includes all diaphragms and valve seats to refurbish your pump. Bring it home for a sweet LOW price! Order Now! Pump not included. Leisure Components Repair Kit for Hand Pumps | *$18.12 |
| Prince PMC-5648 Royal Hydraulic Cylinder, Welded, 4" Bore, 48" Stroke, 2500 psi Maximum Pressure, 57" Retract, 2" Rod Diameter, Crosstube Mounting, Red, 1/2" NPTF
Brand: Prince Part Number: PMC-5648
Prince Welded Royal Hydraulic Cylinder; Bore: 4", Stroke: 48", Maximum pressure: 2500 psi, Column load: 16930 lbs, Retract: 57", Rod diameter: 2", Mounting type: Crosstube end fittings with grease zerks, Color: Red, Port size: 1/2" NPTF | *$540.80 |
 | FERNCO, INC. P1056-54 FLEXIBLE COUPLING 5x4"
Brand: Fernco Model: P1056-54 Part Number: P1056-54
"FERNCO" FLEXIBLE COUPLING
Used to connect the plain ends of pipe
Each coupling is supplied with Series 300 stainless steel clamps
1/Bulk | *$23.91 |
 | Homewerks VSK-STD-B6B Swing Check Valve, Female Thread x Female Thread, Brass, 1-1/4-Inch
Brand: Homewerks Model: VSK-STD-B6B | *$14.46 |
 | Apache Hydraulic Hose - 3/8in. x 24in.L, 2-Wire, 4000 PSI
Brand: Apache Hose Part Number: 98398226
This Apache hydraulic hose is designed for use with petroleum- and water-based hydraulic fluids. Can handle gasoline, diesel fuels, mineral oils, glycol, lubricating oils and more. Hose Diameter (in.): 3/8, Hose Fitting Size (in. NPT): 3/8, Hose Length (in.): 24, Working Pressure (PSI): 4,000 | *$9.02 |
 | Astro Pneumatic (ASTTS22) 20 Ton Capacity Hydraulic Press
Brand: Astro Pneumatic Part Number: TS22
ul liHeavy duty return springs for fast ram retraction/li liReinforced head plate/li liArbor plates included/li liSafety bypass valve assures unit will not exceed rated capacity/li liSafe and durable/li/ulpOverall height: 59-3/8"; base width: 26-3/8"; hydraulic stroke: 5-3/4"; press bed width: 22-1/2" x 4. Meets ANSI standard for performance and safety./p | *$349.99 |
 | Prince Log Splitter Detent Valve
Brand: Prince
Prince Log Splitter Detent Valve for open center systems. Relief valve adjustable to 2750 PSI, preset at 2250 PSI, flow rating up to 25 gal./min. Our most popular log splitter valve. Spring centered in one direction, pressure released detent in the other direction. Automatically kicks back to neutral when cylinder completes stroke. Built-in relief valve ports. Hydraulic balanced, hard chrome plated spool. Handle can be installed in up or down position. Detent release pressure adjustable from 600 to 2000 PSI. U.S.A. Inlet Port (in.): 3/4, Working Port (in.): 1/2, Max. PSI: 2750, Max. Flow (GPM): 25, Adjustable Release Pressure PSI: 1,000 - 2,000 | *$79.99 |
 | Apache Hydraulic Hose - 1/2in. x 48in.L, 2-Wire, 3500 PSI
Brand: Apache Hose Part Number: 98398318
This Apache hydraulic hose is designed for use with petroleum- and water-based hydraulic fluids. Can handle gasoline, diesel fuels, mineral oils, glycol, lubricating oils and more. Hose Diameter (in.): 1/2, Hose Fitting Size (in. NPT): 1/2, Hose Length (in.): 48, Working Pressure (PSI): 3,500 | *$13.94 |
 | Cash Acme 15914A-0125 Shark Bite Temperature and Pressure Relief Valves, 3/4-Inch 125 PSI
Brand: Cash Acme Model: 15914A-0125 Part Number: 15914A-0125
Sold as each. For protection of water heaters and storage tanks. Automatic reseating. 210 deg. temperature relief, starts to open at 200 deg. "White Coat":thermal element coating to isolate mineral buildup. AGA approved. ASME and CSA listed. 125 PSI *3/4" Connection. 3" Element Extension. Manufacturer number: 15914A-0125. Country of origin: United States. Distributed by Cash Acme Div. of Reliance Ww. | *$7.85 |
 | Northman Fluid Power Hydraulic Directional Control Valve - 16.8 GPM, 4500 PSI, 3-Position, Double Solenoid, Closed Center spool, 120 Volt AC Solenoid, Model# SWH-G02-C2-A120-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home all-ports blocked position until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203221 with 1/4in. NPT ports or 203231 with 3/8in. NPT Ports GPM: 16.8, Max. PSI: 4,500, Directional Control: 4-way, 3-position, Volts: 120 AC, Indicator Light: Yes | *$109.99 |
 | Homewerks VGV-2LH-B4CB Gas Ball Valve, Female Thread x Female Thread, Brass, 3/4-Inch
Brand: Homewerks Model: VGV-2LH-B4CB | *$12.44 |
 | 20 Ton Hydraulic Shop Press
Brand: Generic
Remove and install bearings, gears, U-joints, bushings, ball joints, pulleys, etc. Open side heavy duty construction allow work on the longest work pieces. Raise and lower table for the best working distance possible. Spring return ram speed up your work. Get tremendous pressure with very little effort for all your arbor and press out jobs. | *$162.99 |
 | Prince PMC-22024 Gladiator Hydraulic Cylinder, Welded, 6" Bore, 24" Stroke, 3000 psi Maximum Pressure, 35" Retract, 3" Rod Diameter, Crosstube Mounting, Yellow, 3/4" NPTF
Brand: Prince Part Number: PMC-22024
Prince Welded Gladiator Hydraulic Cylinder; Bore: 6", Stroke: 24", Maximum pressure: 3000 psi, Column load: 92000 lbs, Retract: 35", Rod diameter: 3", Mounting type: Crosstube end fittings with grease zerks, Color: Highway Yellow, Port size: 3/4" NPTF | *$780.43 |
 | Homewerks VBV-F20-D3B Full Port Ball Valve, Compression x Compression, Brass, 1/2-Inch
Brand: Homewerks Model: VBV-F20-D3B | *$7.73 |
 | Hydraulic Cylinder Breather Cap - 1/2in. Dia.
Brand: Northern Tool and Equipment
Converts double-acting cylinders to single action. 1/2 in. in size. U.S.A. Fitting Size (in.): 1/2 NPT | *$5.99 |
 | Prince Hydraulic Control Valve - 8 GPM, 2-Spool, Model# MB21BB5C1
Brand: Prince
This Prince hydraulic control valve features a compact design that is ideal for small tractors and other low flow operations. SAE #8 ports eliminate leakage, enclosed handles eliminate exposure to elements. 4-way, 3-position spring center; can be converted to closed center or Power Beyond. 3500 max. PSI; 2000-3500 PSI adjustable relief, preset at 2500 PSI. Max. Flow (GPM): 8, Inlet Port (in.): SAE 8, Outlet Port (in.): SAE 8, Working Port (in.): SAE 8, Max. PSI: 3,500, Directional Control: 4-way, 3-position, Spool (qty.): 2, Adjustable Release Pressure PSI: 2,000-3,500, preset 2,500 | *$199.99 |
 | Partner 206E R3.1 (103E9)
Brand: Avaya Part Number: 206R3.1
Partner 206E R 3.1 Avaya / Lucent pFeatures:/pulliUse the Partner 206E Release 3.1 module to add 2 lines and 6 extensions to your system. /lili Extension ports are designed for either Partner multi-line telephones or single line devices such as modems or fax machines. /li/ulCompatibility: ulliCompatible with all Partner Plus, Partner II and Partner ACS systems./li/ulbr/br/ | *$121.00 |
 | Brass Ball Valve, 1 1/4"
Brand: American Valve Model: M100-11/4 Part Number: M100-11/4
Not Available in Vermont or California. Teflon seats, teflon packing. 150 PSI working steam pressure, 400 PSI water, oil or air. For use with temperatures from -20 to 350 degrees Fahrenheit. Dacromet plated steel handle with vinyl grip and vibration proof nut. Quarter turn operation. WARNING: These valves are not suitable for natural gas or propane applications. | *$13.34 |
 | Flexible Coupling - 4.0" x 6.0" - Black
Brand: HomeAire Model: 79013 | *$7.82 |
 | Nortrac Steel Hydraulic Oil Tank - 19.5 Gallon
Brand: NorTrac
This Nortrac steel hydraulic oil tank features sturdy 12-gauge steel welded construction with a black powder-coat finish. Welded-on mounting brackets. Includes clip-on style breather cap. Suction strainer Item# 778639 fits oil tank Item# 405115 (strainer not included). U.S.A. Capacity (gal.): 19.5, Suction Port (in.): 2, Return Port (in.): 1, Mount Type: 4 bolt, Material Type: Powder-coat steel, Dimensions L x W x H (in.): 22 1/4 x 14 1/4 x 14 3/4 | *$149.99 |
| Prince PMC-22008 Gladiator Hydraulic Cylinder, Welded, 6" Bore, 8" Stroke, 3000 psi Maximum Pressure, 19" Retract, 3" Rod Diameter, Crosstube Mounting, Yellow, 3/4" NPTF
Brand: Prince Part Number: PMC-22008
Prince Welded Gladiator Hydraulic Cylinder; Bore: 6", Stroke: 8", Maximum pressure: 3000 psi, Column load: 92000 lbs, Retract: 19", Rod diameter: 3", Mounting type: Crosstube end fittings with grease zerks, Color: Highway Yellow, Port size: 3/4" NPTF | *$595.34 |
 | 20 Ton Air Hydraulic Oil Filter CAN CRUSHER SHOP PRESS
Brand: Generic
Other Features:
-Ram travel is 6-1/2" with heavy duty return springs for fast ram return.~
-Height range of the bottle jack is 10-1/4" to 20".~
-The air inlet fitting is 1/4" NPT with a working PSI of 110-120 .~
-The crusher compresses most automotive and light truck filters (6" L x 4" diameter) to just 1/4 of their original size and removes 90% of the oil from pre-drained filters.~
-The crusher has a 39" L x 11/16" diameter oil drain hose and an adjustable press plate and shield .~
-Included: 2 Press Plates, 1 Press Head and 1 Filter Crushing Head.~
-Over All Dim: 20-1/2"L x 15-3/4"W x 35-1/2"H. | *$279.99 |
 | GripWerks P119-8-12 Push-Fit Ball Valve with Drain, 1/4-Turn, Brass, 1/2-Inch
Brand: GripWerks Model: P119-8-12 Part Number: P119-8-12
GripWerks P119-8-12 Push-Fit Ball Valve with Drain, 1/4-Turn, Brass, 1/2-Inch.Quarter-turn operation500 PSI non-shock WOGFull PortForged brass body with Teflon seats; Drain waste and capMeets ANSI / NSF 61 low lead requirements; CSA Certified | *$10.31 |
 | 20 Ton Air Floor Hydraulic Shop Press
Brand: Generic
-Useful For: Straightening, Bending And Pressing,Removing And Installing Gears, Bearings And Bushes.~
-"H" Type Structural Steel Frame, With High Stability, Can Be Dismounted For Storage Or Transportation Height Limit Valve.~
-When Piston Rod Reaches Its Limit It Stops Automatically Pump Can Be Operated By Hand Or With Air. | *$329.99 |
 | Prince A300160ABAAA07B Hydraulic Cylinder, Tie-Rod, 3" Bore, 16" Stroke, 3000 psi Maximum Pressure, 31-1/2" Retract, 1-3/8" Rod Diameter, Clevis Mounting, Black, #8 SAE
Brand: Prince Part Number: A300160ABAAA07B
Prince Tie-Rod Hydraulic Cylinder; Bore: 3", Stroke: 16", Maximum pressure: 3000 psi, Column load: 16730 lbs, Retract: 31-1/2", Rod diameter: 1-3/8", Mounting type: Clevis, Color: Gloss Black, Port size: #8 SAE | *$207.54 |
| Prince B300160ABAAA07B Hydraulic Cylinder, Tie-Rod, 3" Bore, 16" Stroke, 3000 psi Maximum Pressure, 31.5" Retract, 1-3/8" Rod Diameter, Clevis Mounting, Black, #8 SAE
Brand: Prince Part Number: B300160ABAAA07B
Prince Tie-Rod Hydraulic Cylinder; Bore: 3", Stroke: 16", Maximum pressure: 3000 psi, Column load: 16730 lbs, Retract: 31.5", Rod diameter: 1-3/8", Mounting type: Clevis, Color: Gloss Black, Port size: #8 SAE | *$208.86 |
| Prince PMC-5536 Royal Hydraulic Cylinder, Welded, 3-1/2" Bore, 36" Stroke, 2500 psi Maximum Pressure, 44" Retract, 1-1/2" Rod Diameter, Crosstube Mounting, Red, 1/2" NPTF
Brand: Prince Part Number: PMC-5536
Prince Welded Royal Hydraulic Cylinder; Bore: 3-1/2", Stroke: 36", Maximum pressure: 2500 psi, Column load: 9700 lbs, Retract: 44", Rod diameter: 1-1/2", Mounting type: Crosstube end fittings with grease zerks, Color: Red, Port size: 1/2" NPTF | *$361.37 |
| 10 Ton Air Hydraulic Foot Pump
Brand: Pro-Forge Part Number: 6840P
Other Features Include:
-Oil Capacity: 42 cu. in (690 c.c).~
-Replaces air or hydraulic pump on most Porta-powers.~
-Over All Dim: 14-1/2" x 7" x 7-1/2" | *$107.99 |
|
