 | FLUKE-700HTH-1
Brand: Fluke Part Number: 700HTH1
The Fluke 700HTH-1 hydraulic test hose is a 10,000 psi, 690 bar working pressure test hose that features stainless steel and nylon construction for use in connecting a Fluke-700HTP-1 or other hydraulic test pump to a unit under test. The Fluke 700HTH-1 allows connection to both a Fluke pressure module and a calibration unit under test from a Fluke 700HTP-1 hydraulic test pump simultaneously. 700HTH-1 is compatible with water and non-corrosive oil. | *$466.95 |
 | Druck DPI620 Advanced Multifunctional Modular Calibrator
Brand: General Electric Part Number: DPI620
The DP620 electrical calibrator can measure and source mA, mV, V, Ohms, frequency and a variety of RTDs and T/Cs. It provides an isolated 24 V loop power supply to energize devices and control loops and a stabilized dc voltage supply for ratio metric transducers. A HART digital communicator is provided for set-up and calibration adjustment of HART devices. The high resolution, color touch screen of the calibrator shows only those buttons necessary for the immediate, selected tasks. The buttons have been sized so that they can be operated by a gloved hand, with no need for a stylus. The display can be configured to show up to six reading windows and each window can show an electrical input/output, pressure, temperature, a USB-connected device or a wireless-connected device. The reading windows also act as active keys and, when pressed, they expand to show more detailed information or to provide advance functions such as step and ramp outputs. | *$4,595.00 |
 | Druck PV621 95% vacuum to 20 bar/ 300 psi pneumatic pressure generation
Brand: General Electric Part Number: PV621
The PV621 has a conventional hand pump, volume adjuster and pressure/vacuum selector, but will generate pressure with half the effort of conventional systems. | *$1,474.00 |
| Druck PV622 95% vacuum to 100 bar/ 1500 psi pneumatic pressure generation
Brand: General Electric Part Number: PV622
The PV622 100 bar (1500 psi) pneumatic station represents a five-fold increase in capability and solves the transportation and EHS issues of using gas bottles and regulators as a pressure source in field locations. It features an innovative dual stage system incorporating a hand pump to generate pressure and a screw press to intensify the pressure. For a typical 4" gauge mounted on the station, 100 bar (1500 psi) can be achieved in just one cycle, but the process can be repeated as many times as required for higher volume systems. The screw press converts to a precision volume adjuster allowing the test pressure to be increased or decreased as required. | *$2,168.00 |
 | Druck UPS-II Current Loop Calibrator
Brand: General Electric Part Number: UPSII
The GE Druck UPS-II can power (24 Vdc) and read 2-wire transmitters to perform field calibrations. Output currents are adjustable to a resolution of 10 microamps in both source and transmitter simulation modes. | *$760.00 |
 | 30 Ton Hydraulic Shop Floor Press
Brand: Generic | *$509.00 |
 | 30 Ton Hydraulic Shop Floor Press - A Frame
Brand: Generic
# Remove and install bearings, gears, U-joints, bushings, ball joints, pulleys, etc. Open side heavy duty construction allow work on the longest work pieces. Raise and lower table for the best working distance possible. Spring return ram speed up your work. Get tremendous pressure with very little effort for all your arbor and press out jobs. | *$509.99 |
 | 45 Ton Air Hydraulic Floor Shop Press w/ 1 YR Warranty
Brand: Generic | *$899.99 |
 | Heavy Duty 45 Ton Air Hydraulic Shop Press
Brand: Generic | *$899.99 |
 | Greenlee 980 Electric Hydraulic Pump With Pendant
Brand: Greenlee Part Number: 980
Automatic or manual ram selector valve. Low voltage pendant coupled to solid state motor controls eliminates contact arcing. Pendant advance control. Molded enclosure protects pump, motor, and circuitry. For use with single hose hydraulic systems with spring return rams. | *$2,897.99 |
 | Haldex 12 Volt DC Power Unit - Manual Operation, Double Acting, Model# 1510038
Brand: Haldex
The Haldex 12V DC power unit with manual operation is used in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank. Check and relief valve. 9/16in.-18 SAE ports. Items 1076 and 1077 are for double acting cylinders; others are for single acting cylinders. U.S.A. Flow (GPM): 2.0 GPM at 1,600 PSI, Reservoir Capacity: 3 qt., Inlet Port (in.): 9/16 18 SAE, Outlet Port (in.): 9/16 18 SAE, Volts: 12 DC | *$629.99 |
 | Haldex AC Hydraulic Power System Self-Contained, 2 HP, 115/230V AC, Model# 1400028
Brand: Haldex
Handles a wide variety of industrial applications. All models have 1725 RPM TEFC (totally enclosed, fan-cooled) motors, check valve, adjustable relief valve and 3000 PSI pressure gauge. High strength cast iron housing. DU bearings. Filler screen, sight gauge and flexible coupling. Hardened and ground alloy steel gears and shafts. Pressure-balanced pumps provide up to 90% overall efficiency. Ideal for systems using low viscosity fluids in high temps and high duty cycle applications. High/low pump provides high speed positioning and then maximum working pressure as in clamping, crimping and metal-forming machines. Does not include manifold or interface. Reservoir Capacity: 5 gal., Inlet Port (in.): 9/16 18 SAE, Outlet Port (in.): 9/16 18 SAE, HP: 2, Volts: 115, 230 AC, Phase: 1 | *$999.99 |
| Haldex AC Hydraulic Power System Self-Contained, 2 HP, 230/460V AC, Model# 1400029
Brand: Haldex
Handles a wide variety of industrial applications. All models have 1725 RPM TEFC (totally enclosed, fan-cooled) motors, check valve, adjustable relief valve and 3000 PSI pressure gauge. High strength cast iron housing. DUÆ bearings. Filler screen, sight gauge and flexible coupling. Hardened and ground alloy steel gears and shafts. Pressure-balanced pumps provide up to 90% overall efficiency. Ideal for systems using low viscosity fluids in high temps and high duty cycle applications. High/low pump provides high speed positioning and then maximum working pressure as in clamping, crimping and metal-forming machines. Does not include manifold or interface. Displacement (cc): 4.23, Displacement (cu. in.): .258, Flow (GPM): 2, Reservoir Capacity: 5 gal., Inlet Port (in.): 9/16 18 SAE, Outlet Port (in.): 9/16 18 SAE, HP: 2, Max. PSI: 1,500, Volts: 230, 460, Max. RPM: 1,725, Phase: 3 | *$999.99 |
| Haldex AC Hydraulic Power System Self-Contained, 5 HP, 230/460V AC, Model# 1400030
Brand: Haldex
Handles a wide variety of industrial applications. All models have 1725 RPM TEFC (totally enclosed, fan-cooled) motors, check valve, adjustable relief valve and 3000 PSI pressure gauge. High strength cast iron housing. DU bearings. Filler screen, sight gauge and flexible coupling. Hardened and ground alloy steel gears and shafts. Pressure-balanced pumps provide up to 90% overall efficiency. Ideal for systems using low viscosity fluids in high temps and high duty cycle applications. Pressure balanced pump provides high speed positioning and then maximum working pressure as in clamping, crimping and metal-forming machines. Does not include manifold or interface. U.S.A. Flow (GPM): 3 1/2 GPM at 2,150 PSI, Reservoir Capacity: 15 gal., Inlet Port (in.): 9/16 18 SAE, Outlet Port (in.): 9/16 18 SAE, HP: 5, Volts: 230, 460 AC, Phase: 3 | *$1,399.99 |
| Haldex AC Hydraulic Power System Self-Contained, 5 HP, 230/460V AC, Model# 1400031
Brand: Haldex
Handles a wide variety of industrial applications. All models have 3450 RPM TEFC (totally enclosed, fan-cooled) motors, check valve, adjustable relief valve and 3000 PSI pressure gauge. High-strength cast iron housing. Filler screen, sight gauge and flexible coupling. Hardened and ground alloy steel gears and shafts. Pressure-balanced pumps provide up to 90% overall efficiency. Ideal for systems using low viscosity fluids in high temps and high-duty cycle applications. High/low pump provides high speed positioning and then maximum working pressure as in clamping, crimping and metal-forming machines. Does not include manifold or interface. Reservoir Capacity: 15 gal., Inlet Port (in.): 9/16 18 SAE, Outlet Port (in.): 9/16 18 SAE, HP: 5, Volts: 230, 460 AC, Max. RPM: 3,450, Phase: 3 | *$1,499.99 |
 | Hydra-Buddy Portable Hydraulic Power - 420 GPH, 5 HP, 1/2in., Model# HBH-02
Brand: Hydra-Buddy
Designed for tough applications around the farm or in the field, this portable hydraulic power replaces tractor power for dump wagons, conveyors, augers, lifts and more. Includes a 5.6-gallon hydraulic tank, 1/2in. male and 1/2in. female quick-connect hydraulic couplers and durable powder-coat finish. Saves fuel and lowers tractor hours and maintenance costs. Hydraulic lines have 3000-lb. burst capacity. Optional wheel kit Item# 24501 sold separately. U.S.A. Flow (GPM): 7 GPM at 900 PSI, Reservoir Capacity: 5.6 gal., Inlet Port (in.): 1/2, Outlet Port (in.): 1/2, HP: 5 | *$1,099.99 |
 | IMPERIAL 192040 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M12x12MM (PACK OF 5)
Brand: Imperial Model: 192040 Part Number: 192040
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
12MM tube x M12 X 1.5 metric thread - male connection. | *$201.99 |
| IMPERIAL 192041 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M14x12MM (PACK OF 5)
Brand: Imperial Model: 192041 Part Number: 192041
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
12MM tube x M14 X 1.5 metric thread - male connector. | *$245.99 |
| IMPERIAL 192042 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M16x12MM (PACK OF 5)
Brand: Imperial Model: 192042 Part Number: 192042
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
12MM tube x M16 X 1.5 metric thread - male connector. | *$215.49 |
 | IMPERIAL 192068 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M16x6MMx1.5" (PACK OF 5)
Brand: Imperial Model: 192068 Part Number: 192068
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
6MM tube x M16 X 1.5 metric thread - male elbow. | *$201.99 |
| IMPERIAL 192069 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M22x6MMx1.5" (PACK OF 5)
Brand: Imperial Model: 192069 Part Number: 192069
"IMPERIAL" AIR BRAKE FITTING
Patenated design of sizes 6MM ABD above to meet DIN 74324 and D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° farinhite.
6MM tube M22 X 1.5 metric thread - male elbow. | *$375.99 |
 | IMPERIAL 91950 #H03912 SUCTION HOSE 3/4x1-3/8" ID
Brand: Imperial Model: 91950 Part Number: 91950
"IMPERIAL" SUCTION HOSE
Hose ID: 3/4"
Hose OD: 1-3/8
Working pressure: 300 psi
Minimum burst pressure: 1200 psi
Minimum bend radius: 5"
Temperature range: -40° F to 212° F
Weatherhead cross reference: H03912
Use with U-Series or 430 U-Series.
Typical application: hydraulic suction hose.
Marine application J1942/1 hydraulic only, ABS and MSHA accepted.
Hose Construction: Inner Tube: nitrile blend,Cover: neoprene,Reinforcement:
3/4" to 1-1/2" - one helical cable wire and one fiber braid.
2" - one helical, straight-stranded wire and one fiber braid. | *$469.99 |
 | IMPERIAL 93413 #H56908 HYDRAULIC HOSE 13/32" - 50' LENGTH
Brand: Imperial Model: 93413 Part Number: 93413
"IMPERIAL" HYDRAULIC HOSE
Hose ID: 13/32"
Hose OD: 49/64"
Hose Lengh: 50 feet.
Minimum Bend Radius: 4-5/8"
Cross Reference: H56908
ABS approved sizes for 5/16" to 1-1/8".
Maximum Working Pressure: 2000 psi
Minimum Burst Pressure: 8000 psi
SAE 100R5, SAE J1402 Type All, DOT A11*, ABS (*Air brake applications limited to sizes -04 through -12)
Temperature range:(hydraulic fluid: -55° F to 302° F,Air brake: -40° F to 200° F,Air: -40° F to 212° F
Hose Construction:(Inner tube: CPE,Cover: fiber braid,Reinforcement: two fiber braids and one steel braid).
Applications: general purpose truck, marine, and hydraulic hose. For air brake (4-12), diesel fuel, grease lines, high temp. petroleum oils and medium pressure hydraulic applications. | *$392.19 |
 | IMPERIAL 97416 TEST PORT COUPLER 1/8"x1/8-27" (PACK OF 5)
Brand: Imperial Model: 97416 Part Number: 97416
"IMPERIAL" TEST PORT COUPLER
Body Size: 1/8
Female Thread: 1/8-27
Overall Length: 1.67
Test Port Coupler.
Cross Reference: PD222 | *$384.19 |
 | Udor Iota 18/E Replacement Pump
Brand: justudorpumps.com Model: jup_Iota-18_E Part Number: jup_Iota-18_E
This Udor Iota 18/E is a replacement pump for the Iota 17/M and Iota 18/M pumps. Udor Iota pumps are excellent for horticultural and agricultural spraying applications, along with lawn and turf care spraying applications such as pest control. They can also be used for concrete seal coating and cleaning. | *$431.00 |
 | Udor Iota 20/GR Pump
Brand: justudorpumps.com Model: jup_Iota-20_GR Part Number: jup_Iota-20_GR
The Udor Iota 20/GR Pump is an Iota 20 pump with a gear reduction for 3HP to 5HP gas engines with 3/4" shafts. The Iota 20 is a 2-diaphragm pump with pulsation dampener and control unit with adjustable pressure regulator, manual dump lever and pressure gauge. These Iota pumps by Udor are commonly used for horticultural and agricultural spraying applications, along with lawn and turf care spraying applications such as pest control. They can also be used for seal coating concrete and cleaning. | *$513.65 |
 | Udor Kappa 120/GR Pump
Brand: justudorpumps.com Model: jup_Kappa-120_GR Part Number: jup_Kappa-120_GR
This Udor Kappa 120/GR pump is a Kappa 120 pump with gear reduction for use on 18HP to 23HP gas engines with 1" shafts. The Udor Kappa 120 pump is a 4-diaphragm pump with pulsation dampener, and control unit with adjustable pressure regulator, manual dump lever, and pressure gauge. These Udor pumps are self-priming and can easily adapt to PTO's and gas engines. Use this Udor Kappa 120/GR pump for a selection of agricultural and horticultural spraying applications. It is also ideal for lawn and turf care spraying applications such as pest control. | *$2,293.45 |
 | Udor Kappa 150/GR Pump
Brand: justudorpumps.com Model: jup_Kappa-150_GR Part Number: jup_Kappa-150_GR
The Udor Kappa 150/GR pump is a Kappa 150 pump with gear reduction for use on 24HP to 35HP gas engines with 1 1/8" shafts. The Udor Kappa 150 pump is a high pressure, high volume, 4-diaphragm pump with pulsation dampener and control unit with adjustable pressure regulator, manual dump lever, and pressure gauge. You can use these Udor series pumps for a range of horticultural and agricultural spraying applications, as well as for lawn and turf care spraying applications such as pest control. | *$2,495.00 |
 | Udor Kappa 25/GR Pump
Brand: justudorpumps.com Model: jup_Kappa-25_GR Part Number: jup_Kappa-25_GR
The Udor Kappa 25/GR pump is a 2-diaphragm pump with pulsation dampener and control unit with a pressure regulator that is adjustable. These Udor Kappa 25/GR pumps are most commonly used for horticultural and agricultural spraying applications, as well as a range of lawn and turf care applications such as pest control. This 25/GR pump by Udor features a manual dump lever, dual ball valve outlets, a pressure gauge and is equipped with a gearbox for 3HP to 5.5HP gas engines with 3/4" shafts. | *$628.00 |
 | Udor Kappa 55GR-8 Pump - 1" Shaft
Brand: justudorpumps.com Model: jup_Kappa_55GR-8 Part Number: jup_Kappa_55GR-8
The Udor Kappa 55GR-8 Pump is a Kappa 55 pump with a gear reduction for 8 HP to 11 HP gas engines with 1" shafts. The Udor Kappa 55 pump is a 3-diaphragm pump with universal drive face, pulsation dampener, and control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and pressure gauge. The Udor 55GR-8 can be used for agricultural and horticultural spraying applications, along with lawn and turf care spraying applications such as pest control. | *$1,100.90 |
 | Udor Kappa 7/115 Volt Pump
Brand: justudorpumps.com Model: jup_Kappa-7_115 Part Number: jup_Kappa-7_115
The Udor Kappa 7/115 Volt Pump is a 2-diaphragm pump with pulsation dampener equipped to a 115 Volt TEFC motor. Motor comes with stub cord and an on/off switch. Use these Udor Kappa 7/115 Volt pumps for pest control, horticultural spraying, lawn care and injection spraying applications. Udor Kappa Pumps are manifolded with anodized aluminum construction internally. Kappa 7, 15, and 18 series pumps have glass-filled nylon heads. Note: It's recommended to use the UD1/4-300 control valve with this pump. | *$777.56 |
 | Udor Kappa 7/12 Volt Pump
Brand: justudorpumps.com Model: jup_Kappa-7_12 Part Number: jup_Kappa-7_12
The Udor Kappa 7/12 Volt Pump is a 2-diaphragm pump with pulsation dampener equipped to a 12 V DC motor. These 7/12 Volt Pumps are mainly used for pest control and horticultural spraying, as well as for lawn care and injection spraying applications.
Udor Kappa Pumps are manifolded with anodized aluminum construction internally. Kappa 7, 15, and 18 series pumps have glass-filled nylon heads. | *$652.05 |
 | Udor Kappa-100/GR Pump
Brand: justudorpumps.com Model: jup_Kappa-100_GR Part Number: jup_Kappa-100_GR
The Udor Kappa 100/GR pump is a Kappa 100 pump with a gear reduction for use on 16 HP and 18 HP gas engines with 1" shafts. The Udor Kappa 100 Pump is a medium pressure, 4-diaphragm pump with universal drive face, pulsation dampener, and control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and a pressure gauge. The Udor Kappa 100/GR pump is perfect for horticultural and agricultural spraying applications, as well as for lawn and turf care applications such as pest control. | *$1,587.68 |
 | Udor Model 5027.75 Gearbox
Brand: justudorpumps.com Model: jup_5027_75 Part Number: jup_5027_75
This Udor Model 5027.75 Gearbox comes ready to couple to the following pumps: RO 70; Udor Kappa 30, 40 and 55 pumps; Zeta 40 and 85 pumps; and 5 HP to 6.5 HP engines with 3/4" shafts. All Udor Gearboxes are black anodized, bearing supported and vented for longevity. | *$431.75 |
 | Udor Omega 140/CC Pump
Brand: justudorpumps.com Model: jup_Omega-140_CC Part Number: jup_Omega-140_CC
The Udor Omega 140/CC pump is a 3-diapraghm pump with pulsation dampener and control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and pressure gauge. It has a dual 1 3/8", 6-spline male PTO shaft. These Udor Omega pumps can be used for a range of horticultural and agricultural spraying applications, along with lawn and turf care spraying applications such as pest control. | *$1,778.00 |
 | Udor Omega 170/CC Pump
Brand: justudorpumps.com Model: jup_Omega-170_CC Part Number: jup_Omega-170_CC
The Udor Omega 170/CC Pump is a 4-diapraghm pump with pulsation dampener and control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and pressure gauge. This 170/CC pump has a dual 1 3/8", 6-spline male PTO shaft. These Udor Omega pumps can be used for a range of horticultural and agricultural spraying applications, along with lawn and turf care spraying applications such as pest control. | *$2,064.08 |
 | Udor RO 70/GR-5
Brand: justudorpumps.com Model: jup_RO-70_GR-5 Part Number: jup_RO-70_GR-5
The Udor RO 70/GR-5 is a 2-diaphragm pump with universal drive face and pulsation dampener. It is fitted with a gear reduction for use with 5HP to 6.5HP gas engines with 3/4" shafts. These Udor pumps are perfect for a range of horticultural and agricultural spraying applications, as well as for lawn and turf care spraying applications such as pest control. | *$872.26 |
 | Udor RO-160/HYD Pump
Brand: justudorpumps.com Model: jup_RO-160_HYD Part Number: jup_RO-160_HYD
The Udor RO-160/HYD Pump is a 4-diaphragm pump with pulsation dampener, mounting rails, and a 2-bolt A-mount flange with a female 1" keyed shaft for direct mounting of a hydraulic motor. Use these RO 160 series pumps by Udor for agricultural and horticultural spraying applications. This pump can also be used on the Turbomist Orchard / Vineyard Sprayer. | *$1,225.00 |
 | Udor Zeta 40/P Polypropylene Pump
Brand: justudorpumps.com Model: jup_Zeta-40_P Part Number: jup_Zeta-40_P
The Udor Zeta 40/P Polypropylene Pump is a 3-diaphragm poly pump with universal drive face, mounting rails and control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and pressure gauge. This Udor Zeta 40/P pump has polypropylene and stainless steel liquid handling parts, making this ideal for handling a range of chemicals, such as chlorine (up to 10%), to kill mold, mildew and fungus. They are also useable with liquid fertilizers, suspension products, de-icing materials and other hard-to-handle liquids. The bolts on the inside and outside of this pump are of stainless steel to prevent rusting, making this ideal for use with salt water as well. These Zeta pumps are easily adaptable to PTO's, gas engines, hydraulic and belt drive applications. | *$1,058.41 |
| Udor Zeta 40E/GR Pump with Gearbox
Brand: justudorpumps.com Model: jup_Zeta-40E_GR Part Number: jup_Zeta-40E_GR
The Udor Zeta 40E/GR Pump with Gearbox is a 3-diaphragm pump with control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and pressure gauge. It is fitted with a gearbox for 4HP to 6.5HP gas engines with 3/4" shafts. The Zeta 40E/GR has a plasticized aluminum head and glass-filled nylon manifolds. These Udor Zeta Pumps are ideal for use with liquid fertilizers, de-icing materials, suspension products and other hard-to-handle liquids, and are easily adaptable to PTO's, gas engines, hydraulic and belt drive applications. | *$1,000.93 |
| Udor Zeta 40P/GR Polypropylene Pump with Gearbox
Brand: justudorpumps.com Model: jup_Zeta-40P_GR Part Number: jup_Zeta-40P_GR
Zeta 40P/GR Polypropylene Pump with Gearbox is a 3-diaphragm poly pump with control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and pressure gauge. It is fitted with a gearbox for 4HP to 6.5HP gas engines with 3/4" shafts. The Udor 40/P series poly pumps have polypropylene and stainless steel liquid handling parts, making them ideal for use with chlorine (up to 10%) to kill mold, mildew and fungus. They are also useable with liquid fertilizers, suspension products, de-icing materials and other hard-to-handle liquids. The bolts on the inside and outside of this pump are of stainless steel to prevent rusting, making this ideal for use with salt water as well. These Zeta pumps are easily adaptable to PTO's, gas engines, hydraulic and belt drive applications. | *$1,320.00 |
 | Udor Zeta 85P Polypropylene Pump
Brand: justudorpumps.com Model: jup_Zeta-85P Part Number: jup_Zeta-85P
The Udor Zeta 85P Polypropylene Pump is a 3-diaphragm poly pump with control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and pressure gauge. The Zeta 85P has polypropylene and stainless steel liquid handling parts, making it compatible with liquid fertilizers, abrasive materials, suspension products and other hard-to-handle liquids such as chlorine (up to 10%) to kill mold, mildew and fungus. These pumps are also ideal for cleaning rooftops and for use with salt water as well. Easily adaptable to PTO, gas engines, hydraulic and belt drive applications. | *$1,132.00 |
| Udor Zeta 85P/GR-5 Polypropylene Pump with Gearbox
Brand: justudorpumps.com Model: jup_Zeta-85P_GR-5 Part Number: jup_Zeta-85P_GR-5
The Udor Zeta 85P/GR-5 Polypropylene Pump with Gearbox is a 3-diaphragm poly pump with control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets, and pressure gauge. It is fitted with a gearbox for 4HP to 6.5HP gas engines with 3/4" shafts. This poly pump has polypropylene and stainless steel liquid handling parts, making this ideal for use with abrasive materials, suspension products, liquid fertilizers and other hard-to-handle liquids such as chlorine (up to 10%) to kill mold, mildew and fungus. This poly pump is also perfect for use with salt water and for cleaning rooftops too. | *$1,403.34 |
 | Leisure Components 131-4 3-Way Low Boy Hand Water Pump
Brand: Leisure Components Model: 131-4 Part Number: 1314
Leisure Components 3 - Way Low Boy Pump. Combination hand pump, electric pump activator and city water. Low-profile design that's great for fold-down campers. Has tough, molded ABS plastic housing with chrome-plated brass spouts. Spend less, get MORE! Order Now! Leisure Components 3-Way Low Boy Pump | *$39.97 |
 | Lion Heavy-Duty Tie-Rod Hydraulic Cylinder - 3000 PSI, 5in. Bore, 24in. Stroke, Model # 50TH24-200
Brand: Lion 3000
Built tough for agricultural and industrial applications. 3000 PSI model is designed to withstand shock loads of up to 6000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with anti-extrusion rings for positive sealing throughout the cylinder. High tensile steel shaft is precision ground, polished and hard chrome-plated. Cylinder can be single or double acting. Attach one port for single and both ports for double acting. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 24, Closed Pin Center (in.): 36 1/4, Shaft Diameter (in.): 2 | *$419.99 |
 | Lion Welded Hydraulic Cylinder - 3000 PSI, 4in. Bore, 8in. Stroke, Model# 644848
Brand: Lion 3000
Double-acting, double-ported welded tie rods are perfect for industrial, agricultural and contractor applications. Features chrome rod, crown piston seals with wear ring, hallite rod seals, double lug base end, threaded rod end with ductile rod clevis and 3/4-16 ORB (SAE 8) ports inline with pins. 1in pin hole size. Complete with pins and cotter pins. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 8, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 3/8 | *$209.99 |
 | Thermal Expansion Valve
Brand: McQuay Model: 074539201 Part Number: 074539201
074539201 Thermal Expansion Valve, McQuay | *$300.00 |
 | Mov-It Tire Products Air Operated Hydraulic Foot Pump, Model# AHP-5Q
Brand: MTP
Mov-It Tire Products air operated hydraulic foot pump is built tough for long service life and easy operation. Application: Foot pump, Length (in.): 12ft. hose, Size: 3/8 quick connector | *$399.99 |
 | Hydraulic Pump, Parker Nichols IGR 133s-129-ks-1 (New)
Brand: Nichols motor operation
Parker Hannifin Corp. U.S.A.-
*Mount - 4 flanges for 1/2" bolts 3" OC apart, 2 1/2" threaded holes 5-3/4" OC
Ports inlet, outlet 3/4"
Shaft 1-1/4" keyed 2" long, 13 spline on the other side
Mount - 4 flanges for 1/2" bolts 3" OC apart, 2 1/2" threaded holes 5-3/4" OC
Dimensions: 10.5" x 7" x 5" | *$294.00 |
 | Omega (OME60123) 12 Ton Shop Press
Brand: Omega Part Number: 60123
60123/p ul liIdeal for the removal or installation of gears, universal joints, pulleys, wrist pins, and other various press jobs. liAlso, excellent for any bending, bonding, or straightening applications.liHeavy duty springs for fast ram returnliMulti position bed for work height adjustmentliHeavy steel welded constructionliCapacity: 12 TonliHeight: 59liWidth: 28liWork Space (Min.): 3-1/8liWork Space (Max): 34-3/4/ul p | *$609.99 |
|
