 | Prince PTO Tractor Pump - 21 GPM, Model# HC-PTO-1A
Brand: Prince Part Number: 438-500
Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. U.S.A. Max. PSI: 2,000, Shaft Diameter (in.): 1 3/8, Shaft Type: Spline 6-tooth, GPM: 21, Material: Aluminum and cast iron, Rotations Per Minute: 540, Weight (lbs.): 40 | *$519.99 |
 | Brand Hydraulics Monoblock Loader Valve with Regeneration, Model# PLV22RFSTKAB
Brand: Brand Hydraulics
The Brand Hydraulics monoblock loader valve with regeneration is a 2-spool loader valve rated for 10 GPM and 4500 PSI, with adjustable relief preset at 2000 PSI. Spool actions are regeneration with spring-centering and 4th position float. Tandem center spools with joystick handle. U.S.A. Max. Flow (GPM): 10, Inlet Port (in.): 8 SAE, Outlet Port (in.): 8 SAE, Max. PSI: 4,500, Spool (qty.): 2 | *$239.99 |
 | Udor Kappa 55 Pump
Brand: justudorpumps.com Model: jup_Kappa_55 Part Number: jup_Kappa_55
The Udor Kappa 55 Pump is a 3-diaphragm pump with universal drive face, pulsation dampener and control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and pressure gauge. Use this Udor Kappa 55 Pump for agricultural and horticultural spraying applications, and for lawn and turf care applications such as pest control. | *$767.45 |
 | 30 Ton Hydraulic Shop Press H-frame
Brand: Generic
Open side heavy duty construction allow work on the longest work pieces. Raise and lower table for the best working distance possible. Spring return ram speed up your work. Get tremendous pressure with very little effort for all your arbor and press out jobs. | *$349.99 |
 | Fr1210c 12volt/Fuel/Pump
Brand: Fill-Rite Part Number: FR1210C
12 VOLT FUEL TRANSFER PUMP W/MANUAL NOZZLE - Basic pump with hose nozzle, telescoping suction pipe, 15 ft.battery cable. | *$355.34 |
 | Haldex Hydraulic Pump - 28 GPM, 2-Stage, Model# 1080036
Brand: Haldex
The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A. Max. PSI: 3,000, Shaft Diameter (in.): 5/8, Shaft Type: SAE A straight keyed, GPM: 28, Stage: 2, Material: Cast iron, Usage: Presses, log splitters, clamping units, compactors, Rotations Per Minute: 4,000, Weight (lbs.): 22 | *$399.99 |
 | Porto-Power B65407 Hydraulic Set
Brand: Porto-Power Blackhawk Automotive Product Part Number: B65407
Features: * Combo includes B65426, B65291, and B65444 * Rugged construction-built for long life and easy construction * Swivel coupling simplifies hydraulic connection and pump operation * Three-positions provide cylinder and advance, hold, or retract operation nbsp;* Operates in any position * Base mounting plate included Specifications: * Pump Usable Capactiy: 91.5 Cubic Inches * Pump Rated Pressure: 10,000 PSI * Pump Output Flow Rate No Load: 66 Cubic Inches per Minute * Pump Output Flow Rate Load: 11 Cubic Inches per Minute * Pump Input Air Pressure: 110-175 PSI * Pump Output Port Threads: 3/8-Inch 0 18 NPTF * Pump Input Port Threads: 1/4-Inch - 18 NPT * Pump Weight (with Fluid): 18-Pounds * Ram Capacity: 10 Tons * Ram Stroke: 10.12-Inches * Ram Effective Area: 2.24 Square Inches * Ram Oil Capacity: 22.4 Cubic Inches * Ram Collapsed Height: 15.63-Inches * Ram Extended Height: 25.75-Inches * Ram Housing Diameter: 2.24-Inches * Ram Plunger Diameter: 1.5-Inches * Ram Base to Inlet Port: 1.67-Inch * Ram Plunger Outside Thread amp; Base Internal Thread: 1-1/4-Inch - 11.5 NPTF * Ram Operating Pressure: 8.930 PSI * Ram Weight: 15-Pounds What#39;s In The Box: * B65426 Foot Operated Pump * B65444 Threaded Ram * 6-Foot Hydraulic Hose with Coupler - B65291 | *$638.92 |
 | Pal's Machining Hydraulic Hand Pump - 10,000 PSI, 1/2in. Piston
Brand: PAL Machining
This Pal's Machining hydraulic hand pump is a versatile choice for heavy-duty industrial and farm operations. Pump operates in a horizontal and vertical (pump body down) position, providing flexibility in mounting. Anodized aluminum pump body and treated steel inserts in high wear areas provide maximum corrosion resistance. U.S.A. Max. PSI: 10,000, Material: Aluminum and steel | *$299.99 |
 | Mueller/B K 109-503 Anti-Sweat Valve
Brand: Mueller Part Number: 109-503
Eliminates condensation, prevents dripping of toilet tanks, ends moisture on floors. Built in check valves prevent hot and cold water cross connection. Water temperature is adjustable, hot water inlet can be shut off during off season. Superior to tank liners, provides a permanent solution. All connections are 5/8'' O.D. compression. Import. | *$13.83 |
 | Kohler K-682-K DTV Six-Port Thermostatic Valve
Brand: Kohler Part Number: K-682-K-NA
Kohler K-682-K DTV Six-Port Thermostatic ValveKohler DTV elevates the experience of showering with approachable, intuitive technology.Features:Color Finish: Not available Model Number: K-682-K Digital control allows bather to set precise temperatureSix outlets available for use3/4" hot/cold supply lines21 gallons per minute (at 45 psi)Specifications | *$811.33 |
 | Udor Kappa 40GR Pump
Brand: justudorpumps.com Model: jup_Kappa_40GR Part Number: jup_Kappa_40GR
The Udor Kappa 40GR pump is a Kappa 40 pump with gear reduction for 4HP to 6.5HP gas engines with 3/4" shafts. The Udor Kappa 40 Pump is a 2-diaphragm pump with universal drive face, pulsation dampener and control unit with pressure regulator that is adjustable, manual dump lever, dual ball valve outlets and pressure gauge. Use these 40GR pumps by Udor for horticultural and agricultural spraying applications, as well as for lawn and turf care applications such as pest control. They are also ideal for de-icing aircrafts and hydrostatic testing | *$846.48 |
 | Prince PTO Tractor Pump - 40 GPM, Model# HC-P-K11
Brand: Prince
At 1000 PSI, direct drive pump delivers 40.1 GPM at 1000 RPM and over 20 GPM at 540 RPM. Pump has roller bearing construction, pressure balanced self-adjusting wear plates and an internally splined drive shaft, 1 3/8in.-21 tooth, so it needs no gear box. Handles pressures up to 2250 PSI. SAE O-ring ports: inlet #20 1 5/8in.-12, drain outlet #16 15/16in.-12, plus auxiliary outlet, #12 11/16in.-12. Includes #20 SAE to 2in. hose adapter and #16 SAE to 1in. female pipe. Easy installation using torque arm restraint. Reservoir size should at least be as large as the output of the pump. U.S.A. Max. PSI: 2,250, Shaft Diameter (in.): 1 3/8, Shaft Type: Spline 21-tooth, GPM: 20, 40, Rotations Per Minute: 540, 1,000 | *$539.99 |
 | Udor Kappa 18 Pump Only (For Electric Motor)
Brand: justudorpumps.com Model: jup_K18DC Part Number: jup_K18DC
This Udor Kappa 18 Pump comes ready to couple to a 12 Volt electric motor (not included). This heavy-duty commercial pump features internally manifolded anodized aluminum construction and glass-filled nylon heads. This version of the Udor 18 pump is the replacement for the Kappa 18/12V pump and motor assembly. Use these Udor Kappa pumps for a range of agricultural, horticultural, and other lawn care spraying applications. Also perfect for pest control. | *$370.00 |
 | Prince Hydraulic Hand Pump - 3000 PSI, Model# PM-HP-10B
Brand: Prince
Powerful! Operates a hydraulic press, dump, plow, snowblade, platform, frame straightener or similar equipment. 3 positions: 1) 1.25 cu. in. per stroke @1500 PSI, 2) .95 cu. in per stroke @ 2000 PSI, 3) .60 cu. in. per stroke @3000 PSI. One gallon reservoir. Inlet check valve, release valve. Pressure port 3/8in. NPT. Applied handle force 60-65 lbs. Use on up to 200 cu. inch, single- or double-acting cylinder. 16 1/2in.L. U.S.A. Max. PSI: 3,000, Material: Steel, Weight (lbs.): 30 | *$449.99 |
 | Blackhawk Automotive B65428 Porto-Power Air/Hydraulic Foot Pump - 10 Ton
Brand: Blackhawk Model: B65428 Part Number: BLAB65428
Blackhawk Automotive B65428 presents the Porto-Power Air/Hydraulic Foot Pump - 10 Ton. Includes hydraulic hose, mounting base plate, 10,000 PSI | *$534.99 |
 | Haldex 1 HP 115/208-230 Volt AC Hydraulic Power Unit, Manual, Model# 1530038
Brand: Haldex
Mounts vertically or horizontally. 60 Hz TEFC motor turns at 3450 RPM. .097 displacement pump and 1.5 gallon reservoir. Relief valve set at 2000 PSI. 1.25 GPM with check valve to prevent back flow. U.S.A. Flow (GPM): 1.25 GPM at 2,000 PSI, Reservoir Capacity: 1 1/2 gal., Inlet Port (in.): 9/16 18 SAE, Outlet Port (in.): 9/16 18 SAE, Volts: 115, 208, 230 AC, Max. RPM: 3,450 | *$449.99 |
 | Chicago Pneumatic 8940168519 Filter-Regulator-Lubricator with Gauge, 3/4-Inch
Brand: CP (Chicago Pneumatic) Model: 8940168519 | *$320.32 |
 | Ametek T-620 Hydraulic Hand Pump, 3000 PSI, without Gauge
Brand: Ametek Part Number: T620
Model T-620 hydraulic pressure pump is small, lightweight and portable. The T-620 features a transparent reservoir to easy view of the test fluid. The pump is compatible with petroleum-based oils or hydraulic fluids. The reference gauge is mounted on the body manifold with a swivel fitting for easy viewing. A vernier adjustment allows for precisely control pressure. A vent valve is provided for quick and positive shut-off and pressure release. The pump is equipped with a 24 in (60.95 cm) rubber hose with 1/4 in NPT connector and 1/4 in BSP adapter for connecting to the instrument-under-test. | *$342.00 |
 | BVA Hydraulics air operated hydraulic pump, remote control
Brand: BVA Hydraulics Model: PA1500L Part Number: PA1500L
BVA Hydraulics air operated hydraulic pump. 10,000 psi working pressure. Metal reservoir. Remote control. 91.5 cubic inch reservoir. 90-175 psi air inlet pressure. | *$576.21 |
 | Udor Kappa 15/12
Brand: justudorpumps.com Model: jup_Kappa_15_12 Part Number: jup_Kappa_15_12
The Udor Kappa 15/12 Pump is an electric 12 Volt diaphragm pump that is mainly used for horticultural and agricultural spraying applications, as well as other lawn and turf care applications such as pest control. This 15/12 Pump by Udor is internally manifolded with anodized aluminum construction. The wet end parts are anodized aluminum, glass-filled nylon and stainless steel. | *$652.05 |
 | Udor Kappa 55GR-5 Pump - 3/4" Shaft
Brand: justudorpumps.com Model: jup_Kappa_55GR-5 Part Number: jup_Kappa_55GR-5
The Udor Kappa 55GR-5 Pump is a Kappa 55 pump with a gear reduction for 5 HP to 6.5 HP gas engines with 3/4" shafts. The Udor Kappa 55 pump is a 3-diaphragm pump with universal drive face, pulsation dampener, and control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and pressure gauge. The Udor 55GR-5 can be used for agricultural and horticultural spraying applications, along with lawn and turf care spraying applications such as pest control. | *$1,037.23 |
 | Udor Kappa-100 Pump
Brand: justudorpumps.com Model: jup_Kappa-100 Part Number: jup_Kappa-100
The Udor Kappa 100 pump is a medium pressure, 4-diaphragm pump with universal drive face, pulsation dampener, and control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and a pressure gauge. The Udor Kappa 100 pump is for horticultural and agricultural spraying applications, along with lawn and turf care applications such as pest control | *$1,129.00 |
 | Udor Iota 20 Pump
Brand: justudorpumps.com Model: jup_Iota-20 Part Number: jup_Iota-20
The Udor Iota 20 Pump is a 2-diaphragm pump with pulsation dampener and control unit with adjustable pressure regulator, manual dump lever and pressure gauge. This Iota 20 is a direct replacement pump for any Iota 17 pump. These Iota pumps by Udor are commonly used for horticultural and agricultural spraying applications, along with lawn and turf care spraying applications such as pest control. They can also be used for seal coating concrete and cleaning. | *$390.00 |
 | 1 inch 07S Watts fire line check valve
Brand: Watts Part Number: 61940
Installed at the residential fire sprinkler service connection to the main, Series 07S dual check backflow preventers protect the water supply against polluted water being siphoned back from the sprinkler system. | *$194.51 |
 | Hydra-Buddy XL Portable Hydraulic Power Pack - 9 HP Honda GX Engine
Brand: Hydra-Buddy
Designed for tough applications around the farm or in the field, this portable hydraulic power unit replaces tractor power for large hydraulic implements, conveyors and grain augers. Also positions farm implements for repair and maintenance. 9 HP Honda GX engine with 7 GPM Barnes pump delivers 1450 PSI system output. Includes a 10-gallon hydraulic tank, 1/2in. male and 1/2in. female quick-connect hydraulic couplers and durable powder-coat finish. Saves fuel and lowers tractor hours and maintenance costs. Hydraulic lines have 3000-lb. burst capacity. Optional wheel kit sold separately. U.S.A. Flow (GPM): 7 GPM at 1,450 PSI, Reservoir Capacity: 10 gal., Inlet Port (in.): 1/2, Outlet Port (in.): 1/2, HP: 9, Max. PSI: 1,450 | *$1,899.99 |
 | Hypro D403GRGI Diaphragm Pump
Brand: Hypro Model: D403GRGI
Hypro D403 pump complete with pressure regulator and gear box for 5-6.5 HP Gas Engines with 3/4" shaft. Hypro medium pressure diaphragm pumps are recommended for spraying herbicides, pesticides, liquid fertilizers, and many other hard-to-handle fluids. Low-cost maintenance and almost wear-free operation make these pumps ideal for a wide variety of spraying jobs. | *$985.00 |
 | Udor Iota 18/M Pump
Brand: justudorpumps.com Model: jup_Iota-18_M Part Number: jup_Iota-18_M
The Udor Iota 18/M pump is a coupled with an 115V TEFC 1HP electric motor with 10-amp draw. It comes complete with an on/off switch, overload protection with manual reset, handle and base plate. The Iota 18/M pump comes equipped with a 12" stub power cord, with no plug. These Iota pumps by Udor are perfect for horticultural and agricultural spraying applications, as well as for lawn and turf care spraying applications such as pest control. They can also be used for concrete seal coating and cleaning. | *$878.58 |
 | 12 Ton Capacity Hydraulic Press (5212)
Brand: Sunex Part Number: 5212
Sunex Tools 12 Ton Capacity Hydraulic Press made of all welded steel constructionbrbrliHeavy duty return springs for fast ram retractionliHydraulic power unit includedliReinforced head plateliBed plates, bearing punch, and bearing shieldincluded as standard equipmentbrbrSpecifications:liCapacity (Tons) 12liHeight (In.) 61.75liBase Width (In.) 24liStroke (In.) brbrUsually ships in 2 - 3 days | *$525.00 |
 | Arcan Hydraulic Shop Press - 20-Ton, Model# SPB20
Brand: Arcan
30-ton rated frame. U.S.A. Continuous Force (Tons): 20, Working Range (in.): 6 3/4 x 33 1/3, Stroke Length (in.): 6 1/2, Inside Bed Dimensions L x W (in.): 24 x 7, Dimensions L x W x H (in.): 32 x 24 x 66 | *$499.99 |
 | Hein-Werner (OMEHW93400) 55 Ton Shop Press with Hand Pump
Brand: Hein-Werner Part Number: HW93400
ul liExcellent for bending, bonding or straightening applications/li liMulti-position bed for work height adjustments/li liHeavy steel welded construction /li liHand pump features 2 speed operation/li liRam 55 ton 6" stroke with a maximum working pressure of 10,000 PSI/700 bar/li/ulThis Hein-Werner shop press is ideal for the removal or installation of gears, univeral joints, pulleys, wrist pins, and other press jobs. Includes 4" pressure gauge. The 2 speed hand pump features pressure relief valve for overload protection and load release valve for single acting cylinder usage. Hand pump is constructed of high strength lightweight aluminum alloy for easy handling and corrision resistance. Hand pump will function in horizontal positions and will also function in some vertical positions. The ram 55 ton 6" stroke features include: rod wiper seals out dirt and contamination; high strength steel contruction from gun drilled solid bar; high flow 3/8" NPTF coupler; one piece high grade alloy bearing for side load protection and long life; polyurethane cup seal provides for optimum performance; industrial hard chrome plated ram helps prevent rust and corrosion; solid steel cylinder body; heavy duty return spring provides quicker retraction.br /br /emstrongDrop Ship Only/strong/em | *$4,285.30 |
 | Westward 3ZC69 Ram System, 10 Ton
Brand: WestWard Tools
Hydraulic Ram System, Capacity 10 Tons, Stroke 6 Inches, 4 Extension Tube Sizes, Complete Kit with Pump Ram and Accessories | *$431.30 |
 | Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 30in. Stroke, 2in. Shaft Size, Model# PMC-5630
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. U.S.A. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 30, Closed Pin Center (in.): 39, Shaft Diameter (in.): 2 | *$350.00 |
 | Haldex Cast Iron Hydraulic Gear Pump - 2.6 Cu. In., Model# 2102725
Brand: Haldex
Heavy-duty cast iron pump has high pressure capability. Pressure-balanced. Operates at up to 3600 RPM. Similar to Webster YD Series. Parker M Series. Rexroth S20, Cross 50P, Cessna 25550, Ultra 2PX, 2PR and 3PR. Commercial P330, and Tyrone P16. Standard SAE 2-bolt B flange, 4.00in. diameter pilot with 7/8in. x 1 5/8in. shaft, 1/4in. square key. SAE O-ring ports: inlet 1 5/8-20, outlet 1 1/16-12. 85% efficient. U.S.A Max. PSI: 4,000, Shaft Diameter (in.): 7/8 x 1 5/8, GPM: 20.2, 40.4, Material: Cast iron, Rotations Per Minute: 3,600 | *$269.99 |
 | OTC 4042 Cobra Hydraulic Ram, Pump and Hose Set
Brand: OTC Model: 4042 Part Number: 4042
Cobra Hydraulic Ram Pump Hose Set This versatile set is usable in a wide variety of hydraulic power applications. CombinesOTC No. 4026 Cobra air/hydraulic power unit, hose, hose halt coupler with the OTC No. 4089 Cobra 10 ton hydraulic ram w/ 10 1/8" stroke. Ram has threaded collar, internal base threads, threaded piston rod end for mounting adaptability. Weight: 25 lbs. 2 oz. | *$760.95 |
 | Haldex Auto Hoist Power Unit 3.5 HP 115/230V, Model# 1280624
Brand: Haldex
Haldex Barnes1.6 GPM @ 1800 PSICheck valve prevents backflow.129 CIR displacement pump3 gallon reservoirHigh strength, die-cast lowering handleE.T.L. recognized and A.N.S.I. approvedU.S.A. Flow (GPM): 1.6 GPM at 1,800 PSI, Reservoir Capacity: 3 gal., Inlet Port (in.): 9/16 18 SAE, Outlet Port (in.): 9/16 18 SAE, HP: 3 1/2, Volts: 115, 230 AC | *$519.99 |
 | Torin Big Red Hydraulic Shop Press with Gauge Dial - 40-Ton, Model# T54001
Brand: Torin
Heavy-duty H-frame. Low pressure pump. Push-button air trigger ram travel control. Continuous Force (Tons): 40, Amps: 12-200, Air Inlet Size (in. NPT): 1/4, Working Range (in.): 0 - 43 1/3, Stroke Length (in.): 7, Dimensions L x W x H (in.): 32 1/4 x 33 3/4 x 75 | *$829.99 |
 | Prince PTO Tractor Pump - 11.4 GPM, Model# HC-PTO-2A
Brand: Prince
Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. U.S.A. Max. PSI: 2,000, Shaft Diameter (in.): 1 3/8, Shaft Type: Spline 6-tooth, GPM: 11.4, Material: Aluminum and cast iron, Rotations Per Minute: 540, Weight (lbs.): 36 | *$479.99 |
 | Arcan Air Powered Hydraulic Shop Press - 40-Ton, Model# CP401
Brand: Arcan
U.S.A. Continuous Force (Tons): 40, Working Pressure (PSI): 120, Air Inlet Size (in. NPT): 1/4, Stroke Length (in.): 6 1/4 | *$1,499.99 |
 | Torin Big Red Professional Hydraulic Shop Press - 20-Ton, Sliding Pressure Cylinder, Model# TY20021
Brand: Torin
This 20-ton professional shop press from Torin has an extra-high H-frame that gives you 5 1/4in. more press space than the standard 36in. 7 1/2in. stroke. 2 3/16in. to 41 1/16in. working range. 21 1/2in.L x 7 1/2in.W inside bed. Sliding pressure cylinder makes room for cumbersome jobs. Included accessory kit makes pressing drive shafts, bearings and tie rods easier. Continuous Force (Tons): 20, Working Range (in.): 2 3/16 -Â 41 1/6, Stroke Length (in.): 7 1/2, Inside Bed Dimensions L x W (in.): 21 1/2 x 7 1/2, Winch Included: No, Dimensions L x W x H (in.): 33 2/3 x 22 x 63 1/2 | *$599.99 |
|
